Rear mower | Crane arm | Robot
CRANE ARM
HYMACH CRANE ARM PROFESSIONAL
VERYVIS SERIES PROFESSIONAL MOD.
TDH VAG 600/800/1200 TR
Hymach’s Professional series is specially developed together with Hinnagård to suit the demanding contractor’s work with brushcutters.
We sell three models, 6, 8 and 11 meters respectively.
The crane arms have a 170° swivel radius, which means you can position the cutting head where you have the best view of it.
The crane arm consists of boom, jib and 1 or 2 telescopic extensions. Ejector is hexagonal, non-sided, arm entirely in Domex 700. Sliding plates made of reinforced Ertalon, a durable and self-lubricating material.
Hydraul Oil 200 L Bolted in frame. Return filter in hydraulic tank. Oil cooler. Sunfab piston pumps on 84cc cutting head 40 cc arm movement, 2 1/2″ suction line to 84 cc 2″ suction line to 40 cc and pressure filter between pump and valve package with electro-hydraulic valve for start and stop of cutting head.
- Hydraulic Oil 200 L Bolted in frame – return filter in hydraulic tank.
- Oil refrigerator 150liter.
- Sunfab piston pumps of 84cc – cutting head 40 cc – arm movement.
- The hydraulic pumps are driven via a power shaft to the gearbox.
- 1:2 gear ratio which allows you to save diesel with a lower engine speed.
- Highest quality of hydraulic pipes resistant to wear, suitable for high pressure.
- Proportional electro-hydraulic valve with 5 sections, joystick with 3 strokes.
- Hydraulic swivel housing for cutting head. More powerful hydraulic cylinders.
- There are three collision safety valves.
Two on the swing cylinder. - You can turn the cutting head and clear even when reversing = increases capacity.
- When the crane arm is in position between the front and rear wheels, a safety valve is activated on the hydraulic cylinder between the boom and the stick.
- The series is adapted to carry AX Chain Head.
CRANE ARM
HYMACH CRANE ARM ENERGY
VERYVIS SERIES ENERGY MOD.
TDH P600 TR
- Construction of special high-strength steel.
- Quick coupling and decoupling system on the tractor rear linkage.
- Support shoe to rest the arm on when the machine is not in operation to prevent stress on the support points.
- Hydraulic pipes resistant to abrasion, wear and bursting, suitable for high pressure in hydraulic circuits.
- Arm rotation hinge 95°.
- Shock absorber on the rotary hinge actuator.
- Powered by the tractor PTO and hydraulic quick coupling of the vehicle, in varying amounts.
- Hydraulic oil operating capacity 200 l.
- High performance gear pump for the hydraulic circuit of the movements.
- Closed-circuit piston pump for the hydraulic circuit of the cutting function.
- Electro-hydraulic fully proportional distributor for single lever joystick movements.
CRANE ARM
HYMACH CRANE ARM ENERGY
VERYVIS SERIES ENERGY MOD.
TDH P600 TR
- Construction of special high-strength steel.
- Quick coupling and decoupling system on the tractor rear linkage.
- Support shoe to rest the arm on when the machine is not in operation to prevent stress on the support points.
- Hydraulic pipes resistant to abrasion, wear and bursting, suitable for high pressure in hydraulic circuits.
- Arm rotation hinge 95°.
- Shock absorber on the rotary hinge actuator.
- Powered by the tractor PTO and hydraulic quick coupling of the vehicle, in varying amounts.
- Hydraulic oil operating capacity 200 l.
- High performance gear pump for the hydraulic circuit of the movements.
- Closed-circuit piston pump for the hydraulic circuit of the cutting function.
- Electro-hydraulic fully proportional distributor for single lever joystick movements.
FENCE AND HEDGE MOWERS
Hymach Road Eagle TRH DP607 TF
For front mounting on an implement carrier/tractor
Hymach is one of Europe’s leading manufacturers of complete crane arms and cutting heads for slope mowing, bush clearing and fencemowing.
With over 40 years of experience, Hymach builds a variety of models for front, center and rear mounted units. The machines can be adjusted for the right and left sides and are available in different lengths, dimensions and adjustability.
Hinnagård sells and customizes the entire Hymach range on site in Vessigebro.
Come to us with your challenges.
In short, there is no clearing need that we cannot meet!
ROBOT
Hymach Robot VRH EX 200
The Herb-Hy 40 HP is a radio-controlled tool carrier available in three different sizes. It can work continuously on slopes with up to 55⁰ gradient.
Forward or reverse travel speed is up to 8 km/h with two-level electronic speed control. It is controlled by a remote control with a graphic display. The belts are widened hydraulically.
One or both belts, from 1300 mm to 1800 mm, can be equipped with different cutting heads – 120 or 150.
OPTIONSTV screen and cameraStump grinderSweeping rollerSnow bladeSnow blowerLoaderBranch cutters etc.
TECHNICAL DATA VRH EX180TECHNICAL DATA VRH FX130 40HP
ROBOT
Hymach Robot VRH EX 200
The Herb-Hy 40 HP is a radio-controlled tool carrier available in three different sizes. It can work continuously on slopes with up to 55⁰ gradient.
Forward or reverse travel speed is up to 8 km/h with two-level electronic speed control. It is controlled by a remote control with a graphic display. The belts are widened hydraulically.
One or both belts, from 1300 mm to 1800 mm, can be equipped with different cutting heads – 120 or 150.
OPTIONSTV screen and cameraStump grinderSweeping rollerSnow bladeSnow blowerLoaderBranch cutters etc.
TECHNICAL DATA VRH EX180TECHNICAL DATA VRH FX130 40HP
