PROCOMAS

Engine package | Slope mower | Crane arm

ENGINE PACKAGE

Procomas BTF8 engine package

The market’s only real competitor to Slagkraft’s front-mounted engine package.
Together with Procomas in Italy, we build this complete, robust unit for front mounting on wheel loaders.
Sunfab engines and Danfoss hydraulics to keep.
Iveco 175hp, stage5 engine.
Available with 8 and 9.5 meter crane.
Diesel engine

Make IVECO Meets Stage 5 emission requirements
Max power kw/hp 129/175

Hydraulic system

Pump cutting head Sunfab 84 cc
Max pressure bar 350
Crane pump Sunfab 40 cc
Max pressure bar 250
Control valve Danfoss PVG 32

Maneuvering system

Joystick Prof 1 Warning system Oil pressure, temp, charge Start, Stop Prop.
With ramp function Cutting headThrottle Electric actuator

Electricity system

Voltage 24V DC
Battery 2*60Ah Generator 70A

Weight & Volume

Weight kg approx. 3000 Diesel tank 250 L Hydraulic tank 200 L

Other

Attachment bracket BM Transport support Foldable

Perfect to combine with our chain sliders!
NOTE!
The unit is also available without an engine.
A good option if you have a wheel loader with sufficient hydraulics.
This makes the unit more environmentally friendly and significantly cheaper.
Contact us for more information!
  • Hinnagard_procomas_motorpaket_AX Slope Mowers_CIMG4845
  • Hinnagard_Procomas_motorpaket_AX Slope Mowers_DSC_0041
  • Hinnagard_Procomas_motorpaket_AX Slope Mowers_Ljunby-L11-+10m
  • Hinnagard-Procomas_bakmonterad_CIMG4269
  • Hinnagard_Procomas_bakmonterad_20190220_111057
  • Hinnagard_Procomas_bakmonterad_2012-10-10-13.56

SLING CLIPPER

Procomas BSK

The Procomas BSK series consists of two models of professional hydraulic slope mowers mounted on the back of a tractor.
When working with the slope mower in the rear mounted position, it is pre-set to work with the cutting head in a forward position of 20° for better visibility during the operator’s work.
The BSK series comes in two lengths: BSK5P55, and BSK5P67.
These measure 5.5 meters and 6.6 meters to the crane tip.

STANDARD TECHNICAL FEATURES AND ACCESSORIES

  • Comes with 80 cm hydraulic extension.
  • Suitable for mounting on tractors from 100 hp and 3.5 tons.
  • Comes standard with 120cm cutting head with reversible rotor with universal Y-type blades, as well as adjustable front and rear throwing guard, height adjustable support roller.
  • Double circuit independent hydraulic system with motor and high performance cast iron pumps; rotor power 56 Hp (41 Kw), rpm 2.900.
  • Electro-hydraulic controls with constant flow and joystick.
  • Oil cooler with thermostat.
  • Rotation of the cutting head with a rotator driven by a hydraulic motor.
  • Safety device to absorb any front impact in the two working directions.
  • Equipment weight approx. 1200 kg, varies depending on working width.
A very handy small crane, and very affordable, which is well suited with slope mowers or a smaller chain head from HINNAGÅRD 100-125cm!

SLING CLIPPER

Procomas BSK

The Procomas BSK series consists of two models of professional hydraulic slope mowers mounted on the back of a tractor.
When working with the slope mower in the rear mounted position, it is pre-set to work with the cutting head in a forward position of 20° for better visibility during the operator’s work.
The BSK series comes in two lengths: BSK5P55, and BSK5P67.
These measure 5.5 meters and 6.6 meters to the crane tip.

STANDARD TECHNICAL FEATURES AND ACCESSORIES

  • Comes with 80 cm hydraulic extension.
  • Suitable for mounting on tractors from 100 hp and 3.5 tons.
  • Comes standard with 120cm cutting head with reversible rotor with universal Y-type blades, as well as adjustable front and rear throwing guard, height adjustable support roller.
  • Double circuit independent hydraulic system with motor and high performance cast iron pumps; rotor power 56 Hp (41 Kw), rpm 2.900.
  • Electro-hydraulic controls with constant flow and joystick.
  • Oil cooler with thermostat.
  • Rotation of the cutting head with a rotator driven by a hydraulic motor.
  • Safety device to absorb any front impact in the two working directions.
  • Equipment weight approx. 1200 kg, varies depending on working width.
A very handy small crane, and very affordable, which is well suited with slope mowers or a smaller chain head from HINNAGÅRD 100-125cm!
  • Hinnagard-Procomas_bakmonterad_CIMG4269
  • Hinnagard_Procomas_bakmonterad_20190220_111057
  • Hinnagard_Procomas_bakmonterad_2012-10-10-13.56

FRONT-MOUNTED CRANE ARM

Procomas BS935

Adaptable, very robust crane mounted on the front of a tractor or implement carrier of suitable type.
Used with heavy-duty swivel housing that allows cutting on both sides of the machine.
Powered by the machine’s own hydraulics.
The machine has good performance for those working in road mowing, pole cutting or other types of municipal jobs.

Machine comes complete with:

Crane Procomas BS935, reach from the center of the tractor of 4.90 m + cutting head.
Crankcase, valve package, foundation with optional bracket (large bm, sms, etc.)
Available with: Hydraulic mowing head, chain cleaner or T125 rake.
  • Hinnagard_20230615_102833
  • Hinnagard_green-deer-2
  • Hinnagard_Procomas-BTS13-8-SM_Transportstod
  • Hinnagard_Procomas-BTS13-8-SM_Utan-Motor
  • Hinnagard_Procomas-BTS13-8-SM_DSC_1012
  • Hinnagard_Procomas-BTS13-8-SM_Danfoss-PVG32
  • EPSON DSC picture

CUTTING HEAD – SLOPE MOWER

Procoma slope mowers are built for professional use.
Used for slope cutting of grass and brush on relatively flat surfaces.
Mounted on the appropriate crane arm of any brand, or excavator.
Available with rotor with F1-F3 type Y blades fitted as standard, or optional hammer blows.
Lengths 100, 120 or 150cm.

CUTTING HEAD – SLOPE MOWER

Procoma slope mowers are built for professional use.
Used for slope cutting of grass and brush on relatively flat surfaces.
Mounted on the appropriate crane arm of any brand, or excavator.
Available with rotor with F1-F3 type Y blades fitted as standard, or optional hammer blows.
Lengths 100, 120 or 150cm.
  • EPSON DSC picture